0.6 1 1.6Mpa Pressure Transmitter 4 20 Constant Pressure Water Supply pressure transducer

0.6 1 1.6Mpa Pressure Transmitter 4 20 Constant Pressure Water Supply pressure transducer
  • Продавец15thinfantry.us
  • Список ценUS $41.94piece
  • Продажная ценаUS $41.94piece
  • ДоставкаБесплатная доставка
  • Рейтинги4,5 (226)

Oписание продукта

This link is dedicated to 8-60 MPa range. For other ranges, please click the corresponding link. Special Roller Press for Cement Plant, Large Range 35 MPa (350 kg)

 

 

Model: pressure sensor PTX5072
Pressure range: 35MPa
Cement mill roller press special,
Drucker Pressure Sensor PTX5072 Conventional Range, 100 kpa, 250 kpa, 1 mpa, 1.6 mpa, 2.5 mpa, 4 mpa, 5 mpa, 6 mpa, 8 mpa, 25 mpa, 35 MPa General Accuracy
 
PTX5072 series pressure sensors can be widely used in industries such as oil and natural gas, automobiles, ships, railways, aerospace, testing and process industries.
PTX5072 specification parameters:
Accuracy: GE DRUCK PTX5072-TB-A1-CA-HO-PA pressure transmitter maximum is + 0.2% FS, generally is + 0.1% FS (nonlinear, lag and repeatability comprehensive error).
Drucker PTX507 pressure sensor range: from 0 to 7kPa to 0 to 0 to 70MPa, arbitrary range pressure or absolute pressure can be used to measure complex pressure (range migration): -100kPa to 0, -10kPa to 5kPa, 10kPa to 25kPa
Intrinsically safe option: comply with ATEX 1254, Eex IA IIC T4 standard.
Zero and full scale: users can adjust 5% through the built-in potentiometer.
Temperature influence: General 0.012%FS/ C, maximum 0.017%FS/ C, -10 ~ +50 C temperature compensation range, general 0.015%FS/ C, maximum 0.02%FS/ C, -20 ~ +80 temperature compensation range
Impact and vibration indicators: 1000G, 0.5ms, sine MIL-STD-202F (mode 213B, condition A)
Insulation resistance: >10M ohm 500Vdc excitation; intrinsically safe <5mA 500Vac
Pressure response of Drucker PTX507 pressure sensor: 1kHz
GE Drucker PTX5072 output: 4 ~ 20mA (two line)
Working temperature: -40 ~ +100 C
Pressure interface: G1/4 internal thread (with various adapters, such as M20 * 1.5 external thread).
Circuit interface: DIN socket (PTX5072-TB-A1-CA-HO-PA), IP65 integrated cable (PTX7511), IP67 integrated cable (PTX7533),
6 pin * socket (PTX7516), M20 pipe thread (PTX7535)
PTX5072 application scope:
PTX5072 series pressure sensors can be widely used in industries such as oil and natural gas, automobiles, ships, railways, aerospace, testing equipment and process industries.
PTX5072 hazardous area certification
Can I use PTX5072 in a dangerous area?
All the information about the Drucker PTX507 pressure sensor security certification is described in detail in the "installation guide" section, which can be downloaded from the "download" section of this page.
UNIK5000 has IECEx and ATEX intrinsic security certification and can be used in three different application environments. Consult your local certification authority about which certification should be adopted in your area.
Dust area application: IECEx/ATEX \'ta\' Group IIIC - this authentication is applicable to areas where danger comes from combustible dust: Ex TA IIIC T111 [T111] C Da IP64 (-40 degree < < < < < < < < 80 degrees).
 
PTX5072 performance parameters:
How fast does PTX5072 respond to pressure changes?
frequency response
The response of the sensor is divided into 3 parts.
The pressure is transferred from the measuring medium to the sensor diaphragm.
When the pressure is about 1 bar, the frequency response increases from 500 Hz to 1 kHz from the standard G1/4 external threaded pressure interface to the sensor diaphragm. Especially at low pressure, the path of the flow and outflow sensor is very clear. So far, this path has the most important effect on the response time of the pressure sensor.
The response time of silicon to pressure change:
The response time varies with the pressure. As the pressure increases, the response time increases from about 1 kHz at 1 bar to 50 kHz at 60 bar.
The response time of the electronic component to the input change:
Usually UNIK5000 electronic components respond to input variations by 5 kHz; when the pressure is below 350 mbar and the output voltage is 10 V, the frequency response drops to 2 kHz.

 

 

Связанные категории