High Power Single Pole Machine Main Board 0 Pipe Integrated Rod Integrated Machine Mini Bar Inverter Fan Switch

High Power Single Pole Machine Main Board 0 Pipe Integrated Rod Integrated Machine Mini Bar Inverter Fan Switch
  • Продавец15thinfantry.us
  • Список ценUS $34.00piece
  • Продажная ценаUS $34.00piece
  • ДоставкаБесплатная доставка
  • Рейтинги3,9 (557)

Oписание продукта

modname=ckeditor
Motherboard size: 19.2CM long *2.8CM width *3CM high
Features: 6 high-power FETs, 2 high-power silicon output, multi-tube shunt essentially reduces the calorific value. Large turn-off inductance is used to reduce the serious fever caused by small inductance. Battery anti-reverse connection, fan control before turning on. 12V battery is supplied with 360W power. It is recommended that 4 high-quality 32650 lithium batteries be used to supply 36. 0W.
The latest upgrade of large inductance, large transformer, better effect, lower heating and more power saving! Fan, switch, adjust potentiometer, potentiometer knob.
1: input voltage DC 10-17V, recommended 5 sections.(please refer to the 3, 4, or 5 section of the purchase).Power type 3.7V32650 lithium battery or 12V lead-acid battery.
The 2:40 PVC pipe is exclusively used.
3: with battery anti reverse protection, overheating protection, overheating and power failure protection.
4: adjustable output frequency power size.
5The fan switches on by pressing the switch.
6: Overheat protection, optional, need to contact the shopkeeper (does not mean you can keep pressing, normal use of 5 seconds once enough)
7: Batteries need to choose 6500 maH batteries. Batteries with discharge capacity of more than 6C are batteries with discharge current capacity of at least 35A and above. Attention should be paid to discharge current, not capacity.
This product ensures that after the test is qualified, the profit will be small. The buyer will take care of the freight back and forth.

Matters needing attention:

When testing the machine, please use a light bulb within 300W. Do not exceed 300W. Because of volume limitation and want to output higher frequency, the output turn-off capacitance used is smaller. Too much load (load resistance is smaller) will lead to the difficulty of turning off and easy to burn the board.

 

\'